Embedded Files
NOTE: There are many club attachments on Amazon, etc. that advertise that they work with the Q3/3s when they do not. Please read this page to avoid purchasing something that does not work.
This page will feature golf club attachments that have been designed for use with the Quest 3/3s. The LEDs on the Quest 3/3s controllers are located on the controller face, unlike the Q2 that has them on the halo rings. This makes a huge difference for golf games because when holding the controller like a golf club, or holding a club attachment, the face of the controller is facing the ground, not the headset. This means you will have severe tracking problems with straight down type golf club adapters.
This is not an exhaustive list. There are many more options on Amazon and other sites that you can browse. The ones here are in common use, have great reviews, and I have personally tried out. Some attachments like the Yezro, will work with both Q2 and Q3 models as well as QPro controller.
Game developers have no control over tracking so it's important that you verify with the attachment seller/maker that their adapter will work with the Quest 3 if you are unsure. We are only offering information here as a courtesy. There are some users that have reported success with adapters that do not have the controller face pointed fully at the headset. We will not be including those on this page.
This site has no affiliate links and we do not profit from this page at all. It was put up solely as a service to the VR golfing community. You can read about how the controllers track on the Quest 3 here: Quest 3 Brings a Big Change to Controller Tracking Coverage
All info on these pages is provided as a courtesy to the VR golf community. Please ensure you have appropriate space to play, that your controller is secured to the attachment and that the attachment you purchased is compatible with your controllers. This is an information only site. I am not affiliated with any attachment maker and this site contains no affiliate links and does not endorse any particular attachment. Please contact the seller of your attachment for support.
Wondering if you have the space for a longer attachment?
If you are wondering if longer attachments will work in your space, check out this video from waltersbg aka Uncles_Monkey. He uses the new Yezro 24" attachment in the video. DeadEye has a 26" model. You can use this video as a guide towards deciding which will work best for you. Thanks to Uncles_Monkey.
New Releases (info below)
Yezro Dual Length 2025 Model
FormX Walkabout Grip to Putt 3
Longer Models (24"+)
Yezro 2025
Dual Length
Just released, this model can be used at 18 or 27 inches by adding the included longer shaft. When equipped, the longer shaft pushes the controller cage down to give a much better feel of a real club while keeping the controller face in optimal position for tracking. Three adjustable weight disks are threaded at the bottom.
Yezro 26 inch Weighted
All metal contruction and build quality matches their other clubs. This one is 24 inches in length and is has two weights at the bottom that are the removable.
Both the grip and bottom shaft are threaded rods so you can disassemble it into 3 pieces, the longest of which is 12 inches if you want to travel with it.
Golf Pro for Q3
3D Printable
You'll need your own club to cut down for this and access to a 3D printer, but you can adjust the weight and length to whatever works for you.
A NOTE ABOUT Q3/Q3s GRIPS
There are some sellers on Amazon advertising attachments as Q3/3s compatible when they are not. For the Q3/3s to track optimally, the controller must be pitched about 90 degrees so the full face is pointed at the headset. Do not buy a straight down attachment unless you have a Q2.
Mid-Length Models (approximately 17-18")
FormX Grip to Putt Version 3
Newly released, the the Grip to Putt 3 feature prevents accidental hits in WMG, but also has a great feature for GOLF+.
Pressing the side trigger in G+ brings up the wind, elevation and distance to the pin. The grip button avoids the need to flip up the controller to see this info.
Great build quality and the safety tab holds the controller securely in place.
Virtual Printality Pro Adapter
Counterweighted, metal core club head gives you the feeling of swinging a real club.
Regulation, quality golf grip.
Sandwich mounting system secures controller for worry free swinging.
No obstruction of the controller IR sensors.
Total length: 17"
Total weight with Quest 3 controller: 460g
Yezro Y13s 90 Degree
Hugely popular adapter with adjustable weights that uses an L-bracket to ensure the controller face points to the headset cameras. All metal design.
Yezro also offers a retrofit kit if you have their straight down Y11 adapter that will convert it to 90 degrees for use with Q3/3s controllers. You can view the retrofit kit here:
DeadEyeVR
Optimal Tracking: Open face allows the Quest 3/3s to track the controllers super effectively. This adapter is also compatible with the Quest Pro.
NOTE: DeadEyeVR has other models that can be viewed on their website.
Sanlaki
Angled adapter that ensures the LEDs are facing the headset cameras.
This designer also has a UK distributor so if you are in Europe you can save on postage costs.
This adapter has a preset in GOLF+
Yezro Non-Weighted Budget Friendly
Similar to the Yezro Y13s, this club is a more budget friendly model that is not weighted, but you can add it via lead fishing line or tape to customize to what works for you. The features are identical to the other Yezro models.
Short Models for Tight Spaces
Virtual Printality Sports Grip
The OG of golf club attachments, they've hit it out of the park again with this new series of Q3/3s specific handles.
Available in Round, D-shape, or Tennis grip, they're perfect for golfing in smaller spaces and racket/paddle games of all kinds. They're wrapped in Gamma tape for comfort and the quality is just superb. The compact size makes them very suitable for travel.
Virtual Printality ships from Canada, but they've partnered with Mint 3D so if you live in the UK, you can save on postage costs by ordering through them.
AMVR Controller Extensions
These Q3/3s controller extensions from AMVR give your hands a little more room by adding 1.18 inches of length and can allow for a more comfortable grip with two hands.
Google Sites
Report abuse